Yehia M. Haddad

Ph.D., P.Eng.
Professor, Mechanical Engineering

SELECTED PUBLICATIONS

Books Authored:

  1. Haddad, Y. M. , 1995. Viscoelasticity of Engineering Materials, Kluwer, Dordrecht, The Netherlands, 416 pp., Hardbound ISBN 0-412-59030-1.
  2. Haddad, Y. M. , 2000. Mechanical Behaviour of Engineering Materials, Kluwer, Dordrecht, The Netherlands:
    Hardbound Volume I: Static and Quasi-static Loading, 448 pp., ISBN 0-7923-6354-X.
    Hardbound Volume 2: Dynamic Loading and Intelligent Material Systems, 504 pp., ISBN 0-7923-6355-8.
    Hardbound Set Volumes I & II: ISBN 0-7923-6521-6.

      Read a review in the AIAA Journal, Vol. 39, No. 4, 2000.

  3. Haddad, Y. M. , 2003. Engineering Mechanics, CD-ROM, , TISEC, INC., Montreal, Canada.

Books Edited:

  1. Haddad, Y. M., 1998. Advanced Multilayered and Fibre-Reinforced Composites Proceedings of the NATO Advanced Research Workshop on Multilayered and Fibre-Reinforced Composites: Problems and Prospects, Kiev, Ukraine, June 2-6, 1997, Kluwer Academic Publishers, Dordrecht, The Netherlands, 600 pp., ISBN 0-7923-4911-3.

Chapters in Handbooks and Encyclopedia:

  1. Haddad, Y. M. et al., 1994. Special Acoustic Nondestructive Testing Methods, in Nondestructive Testing Handbook, Section 5, The American Society for Nondestructive Testing, Inc., Columbus, OH.
  2. Haddad, Y. M., 2001, Viscoelasticity/Anelasticity, in Encyclopaedia of Materials Science and Technology, Elsevier Science, Oxford, United Kingdom.

Back to Top

Papers in Refereed Journals

  1. K1. Jacquelin, E. and Haddad, Y. M., 2004. On the Constitutive Modelling of Viscoelastoplastic Behavior of a Class of Glassy Polymers, , J. Mech. Beh. of Mater (Submitted ).
  2. Kawai, M. and Haddad, Y. M., 2003. On the Constitutive Modelling of Viscoelastoplastic Behavior of a Class of Glassy Polymers, International Journal of Plasticity (Submitted ); in collaboration with University of Tsukuba, Tsukuba, Japan.
  3. Haddad, Y. M. et al. 2003. Relation Contrainte-Débit Pour Un Ecoulement Non Permanent De Fluids Non Newtoniens En Conduite Déformable Poreuse Avec Une Paroi Viscélastique et Anistrope, ITBM-RBM France (Submitted).
  4. Haddad, Y. M. et al. 2003. Pulsating Flows in Inelastic Fluids in Anisotropic Porius Viscoelastic Tubes, ITBM-RBM France (Submitted).
  5. Haddad, Y. M., 2003. On the Stochastic Deformation Process in a Randomly Structured Polycrystalline Solid, Journal of Materials Processing Technology, Paper #MSH944 (Submitted).
  6. Haddad, Y. M. and Feng, J., 2003. A Micromechanical Model for the Optimization of a Class of Viscoelastic Fibre-Composites, J. Mech. Beh. of Mat.( Submitted).
  7. Feng, J. and Haddad, Y. M., 2003. On the Trade-off between Damping and Stiffness in the Design of Discontinuous Fibre-Reinforced Composites, Composites Part B 34(2003) 11-20.
  8. Molina, G. J. and Haddad, Y.M., 2001. On the Design of Acousto-Ultrasonics-Pattern Recognition Classifiers for the Identification of Material Response States, J. Mech. Beh. Mater., Special Issue 'Micro-Macro Studies in Mechanical Behavior of Manufacturing Materials' 12(5), 255-72.
  9. Haddad, Y. M. and Yu, P., 2001. A Dynamic System Approach to the Characterization of the Response Behaviour of Materials with the Inclusion of Time-History Effects, J. Mech. Beh. Mater., Special Issue 'Micro-Macro Studies in Mechanical Behavior of Manufacturing Materials' 12(5), 273-87. Invited Paper.
  10. Feng, J. and Haddad, Y. M., 2001. On the Propagation of Viscoelastic Waves in a Composite Laminated Plate, J. Mech. Beh. Mater., Special Issue 'Micro-Macro Studies in Mechanical Behavior of Manufacturing Materials' 12(5), 289-313. Invited Paper.
  11. Haddad, Y. M. and Feng, J., 2001. On the Optimization of the Mechanical Behaviour of a Class of Composite Systems under both Quasi-static and Dynamic Loading, Journal of Materials Processing Technology 119, 222-8.

Back to Top

Papers in Refereed Conference Proceedings

  1. Haddad, Y. M. and Feng, J., 2005. On Performance Based Design of A Class of "Adaptive" Fibre-Composites for Applications in Building Structures, in Proceedings, COST C12- International Conference on Improving Buildings' Structural Quality by New Technologies, University of Innsbruck, Austria, January 20-22, 2005.
  2. Haddad, Y. M. and Yu, P., 2004. A Dynamic System Approach to The Characterization of a Class of Rheological Materials at base-temperatures, NATAS' 04 - North American Thermal Analysis Society Conference, Williamsburg, Virginia, October 4-6, 2004.
  3. Haddad, Y. M., 2004. On the Design of Pattern-Recognition classifiers for The Prediction of a System Response States with Applications in Engineering and the Sciences, 2004- Joint Meeting of the International Conference on Education and Information Systems (EISTA) and the International Conference on Cybernetics and Information Technologies, Systems and Applications (CITSA), Orlando, Florida, July 21-24, 2004. Paper ID # E462HP.
  4. Haddad, Y. M., 2004. A Knowledge-Based Intelligent Non-destructive Inspection System for the Determination of Material Response States, RRRTEA' 04, International Conference of Restoration, Recycling and Rejuvenation Technology for Engineering and Architecture Application, Cesena, Italy, June 7-11, 2004, pp. 213-19.
  5. Haddad, Y. M. and Feng, J., 2004. On the Optimization of a Class of Adaptive Composite Systems: A Deterministic Micromechanical Approach, in Proceedings, International Conference of Multiscaling in Applied Science and Emerging Technology: Fundamentals and Applications in Mesomechanics, Patras, Greece, May 31-June 4, 2004, pp. 470-7.
  6. Haddad, Y. M., 2004. On the Stochastic Micromechanics of a Class of "Adaptive" Composites with a Time-history Dependent Memory, Int. Conf. of Influence of Traditional Mathematics and Mechanics on Modern Science and Technology, Messini, Greece, May 24-28, 2004, pp. 155-62.
  7. Haddad, Y. M. and Feng, J., 2004. On the Development of a Class of "Adaptive" Fibre Composites: 1. A Trade-off between Damping and Stiffness by Optimization, CIRP 2004 Design Seminar "Design in the Global Village", Cairo, Egypt, May 16-18, 2004.
  8. Haddad, Y. M. and Feng, J. 2004. On the Trade-off between Damping and Stiffness for a Class of Fibre-Composites, Proceedings of PACAM VIII-Eighth Pan American Congress of Applied Mechanics, Havana, Cuba, Jan. 05-09, 2004, Vol. 10, pp. 17-20.
  9. Haddad, Y. M., 2003. On the Nondestructive Identification of the Mechanical Response of Engineering Materials: A Pattern Recognition and Classification Approach, in Proceedings, 4th International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA, Sept. 15-17, 2003, DEStech Publications Inc., Lancaster, PA.
  10. Haddad, Y. M., 2003. On the Non-destructive Determination of the Mechanical Response State in Biomaterials: A Pattern Recognition and Classification Approach, in Proceedings, BioMech 2003, The IASTED International Conference On Biomechanics, June 30 - July 02, 2003, Rhodes, Greece, pp. 273-8.
  11. Haddad, Y. M. and Molina, G., 2003. On the Nondestructive Quantification of the Mechanical response State in a Composite Material Using a Pattern-recognition / Classification Methodology, ICCE/10 - Tenth Int. Conference on Composite Engineering, New Orleans, La, July 20-26, 2003.
  12. Haddad, Y. M., 2003. On the Stochastic Micromechanics of a Class of Randomly Structured Material with a Time-history Dependent Response, APM 2003 - XXXI International Summer School - Conference "Advanced Problems in Mechanics", St. Petersburg, Russia, June 22 - July 2, 2003.
  13. Feng, J. and Haddad, Y M., 2003. On the Optimization of a Class of Laminated Short Fiber-Composites: A Trade-off between Damping and Stiffness, 16th Aerospace Structures and Materials Symposium, Montreal, Canada, April 28-30, 2003.
  14. Haddad, Y. M., 2003, On the Stochastic Thermo-micromechanics of a Class of Material with a Time-history Dependent Response, Thermodynamics 2003, University of Cambridge, U. K., April 9-11, 2003.
  15. Haddad, Y. M., 2002. On the Stochastic Deformation Process in a Randomly Structured Material, in Proceedings, Int. Symposium of Multiscaling in Mechanics, Sept. 2-6, 2002, Messini, Greece.
  16. Haddad, Y. M. and Molina, G. J., 2002. On the Characterization of Material Repeated Impact States Using a Pattern Recognition Approach, in Proceedings, 14th USNCTAM-U.S. National Congress on Theoretical and Applied Mechanics, June 23-28, 2002, Blacksburg, VA, U. S. A.
  17. Haddad, Y. M., 2002. On the Thermoviscoelasticity of Engineering Materials, in Proceedings, Plasticity'2002-9th Int. Symposium, Aruba, Jan. 3-9, 2002, pp. 186-8.
  18. Haddad, Y. M., 2001. Pattern Recognition and Classification Methodology for the Characterization of Material Response States, in Proceedings, Int. Workshop on Integrity of Materials and Structures, Dept. of Aeronautics and Astronautics, Stanford University, Stanford, CA, Sept. 12-15, 2001.
  19. Haddad, Y. M., 2001. On the Stochastic Micromechanical Theory of Discrete Material Systems, in Proceedings, 6th International Conference on Mechanics, July 19-21, 2001. Thessalonili, Greece, Vol. II, pp. 245-50.
  20. Haddad, Y. M., 2001. Pattern Recognition and Classification Approach to the Identification of Mechanical Response States in Structural Components, in Proceedings, AIAC'2001, 9th Australian Int. Aerospace Conference, March 5-8, 2001, Canberra, Australia, CD-ROM, Paper #103.

Back to Top


Tel: (613) 562-5800 ext. 5620
Fax: (613)562-5177
E-mail:haddad@genie.uottawa.ca

Last updated: