Publications

 

Papers in Refereed Journals (Published/Accepted):

 

J11. Zinoviev, I. and Mohareb, M. (2004), “Analysis and Design of Laterally Unsupported Portal Frames for Out-of-plane Stability”, Canadian Journal of Civil Engineering, accepted for publication, Dec. 2003

 

J10. Nowzartash, F. and Mohareb, M. (2004), “Planar Bending of Sandwich Beams with Transverse Loads Applied Off the  Centroidal Axis”, American Society of Civil Engineers, Journal of Engineering Mechanics, accepted for publication, Oct. 2003

 

J9. Mohareb, M. and Ozkan, I. (2004) “Interaction Relations for Square Hollow Structural Sections – A Lower Bound Solution”, American Society for Civil Engineers, Journal of Structural Engineering, accepted for publication, Jun. 2003

 

J8. Ozkan, I. and Mohareb, M. (2003) “Experimental Investigation of Pipe Sections under Bending, Twist, and Shear”, to appear in the American Society for Civil Engineers, Journal of Structural Engineering, Vol. 129 (10), pp. 1350-1357

 

J7. Mohareb, M. and Nowzartash, F. (2003) “Exact Finite Element for Warping Torsion of Open Steel Sections”, American Society of Civil Engineers, Journal of Structural Engineering, Vol. 129(2), pp. 215-223

 

J6. Mohareb, M. (2003) “Plastic Resistance of Pipe Sections: Upper Bound Solution”, American Society of Civil Engineers, Journal of Structural Engineering, Vol. 129 (1), pp. 41-48

 

J5. Mohareb, M., (2002) “Plastic Interaction Relations for Pipe Sections”, American Society of Civil Engineers, Journal of Engineering Mechanics, Vol. 128(1), pp 112-120.

 

J4. Mohareb, M., (2001) “Exact yield hyper-surface for thin pipe sections”, International Journal of Pressure Vessels and Piping, Vol. 78 (7), pp 507-514.

 

J3. Mohareb, M., Kulak, G. L., Elwi, A., and Murray, D. W. (2001), “Testing and Analysis of Steel Pipe Segments”, American Society of Civil Engineers, Journal of Transportation Engineering, Vol. 127 (5), pp 408-417.

 

J2. Mohareb, M. and Murray, D. W. (1999), “Mobilization of Fully Plastic Moment Capacity for Pressurized Pipes Subjected to Axial Loading”, American Society of Mechanical Engineers, Journal of Offshore Mechanics and Arctic Engineering, Vol. 121, November, pp 237-241.

 

J1. Girija Vallabhan, C. V., Das, Y. C., Mohareb, M., Mehmet, A. and Bailey J. R., (1993),   “Analysis of Laminated Glass Units”, American Society of Civil Engineers, Journal of Structural Engineering, Vol. 119 (5), pp 1572-1585.

Papers in Conference Proceedings:

 

C11. Evgin, E., Edde, C., and Mohareb, M. (2003), “Numerical Analysis of Stress-Strain States in a Soil Structure Interface Test”, the 56th Canadian Geotechnical Conference CD-ROM Proceedings, Winnipeg, Manitoba, Sep.-Oct. 2003

 

C10. Nowzartash, F., and Mohareb, M. (2003), “Finite Element for Elasto-Plastic Response of Moderately Thick Steel Pipes”, the 19th Canadian Congress of Applied Mechanics, Calgary, Alberta, Jun. 2003, pp. 196-197.

 

C9. Evgin, E., Fakharian, F., and Mohareb, M. (2003), “Numerical Analysis of Stress States in Soil-Structure Interaction Tests”, The 13th International Offshore and Polar Engineering Conference, Vol. II, Honolulu, Hawaii, International Society of Offshore and Polar Engineers, Golden, Co., May, pp 641-647.

 

C8. Mohareb, M. and Dabbas, A. (2003),”Lateral Stability of Partially Restrained Cantilever Supports”, submitted Dec. 2002 to the 2003 Annual Stability Conference Baltimore, Maryland, April , pp. 671-694.

 

C7. Mohareb, M., and Ozkan, I. F. (2002), “Plastic Design of Square Hollow Structural Steel Sections”, 4th Structural Specialty Conference of the Canadian Society for Civil Engineering Montreal CD-ROM Proceedings, Quebec, Canada, Jun.

 

C6. Ozkan, I. F., and Mohareb, M. (2002), “Plastic Design of Steel Pipe Sections Under General Stress Resultant Combinations”, 4th Structural Specialty Conference of the Canadian Society for Civil Engineering Montreal CD-Proceedings, Quebec, Canada, Jun.

 

C5. Mohareb M., Alexander S. D. B., Kulak G. L., and Murray D. W. (1993), Laboratory Testing of Line Pipe to Determine Deformational Behavior”, The 12th International Conference on Offshore Mechanics and Arctic Engineering, ASME, Glasgow, Scotland, June 21, pp. 109-114

 

C4. Girija Vallabhan, C. V., Das Y. C., Mohareb, Magdi, Mehmet, A., and Bailey, J. R.,   (1991) “Analysis of Laminated Glass Units”, Proceedings of the Asian Pacific Conference on Computational Mechanics, Hong Kong, Dec., pp. 1037-1042

 

C3. Girija Vallabhan, C. V., Das, Y. C., Mohareb, Magdi, Mehmet A., and Bailey, J. R., (1991) “Experimental Verification of the Analytical Solution of the Laminated Glass Units”, presented at the Texas Section ASCE Meeting, San Antonio, Texas, Nov. 12, Selected as Texas Section ASCE Outstanding Technical Paper.

 

C2. Girija Vallabhan, C. V., Das Y. C., and Mohareb, Magdi, “A Mathematical Model for Analysis of Laminated Units”, (1991), Advanced Composite Materials in Civil Engineering Structures Proceedings, Material Engineering Division, ASCE, Las Vegas, Jan. 31, pp. 325-335.

 

C1. Girija Vallabhan, C. V., Das, Y. C., Mohareb, Magdi, Mehmet, A., and Bailey, J. R., (1991) “Experimental Verification of the Analytical Solution of the Laminated Glass Units”, Advanced Composite Materials in Civil Engineering Structures Proceedings, Material Engineering Division, ASCE, Las Vegas, Jan. 31, pp. 417-428.

 

 

Invited Presentations:

 

P3. Mohareb, M. (2002) “Plastic Interaction Relations for Tubular Sections”, The Tenth Steel Structures Education Foundation Engineering Education Meeting, Toronto, Ontario, Mar.

 

P2. Mohareb, M., (1999), “Dynamic Analysis of Structures Subject to Impact Forces”, University of Windsor, Ontario, Canada, Jul.

 

P1. Mohareb, M., (1999), “Dynamic Analysis and Design of the Hydro-Transport Structure”, University of Ottawa, Ontario, Canada, Mar.

 

|Home|

 

 

Updated Feb. 13,, 2004